联系站长! 傻子-跸西blog 傻子-跸西微blog
如需使用回复可见功能
请回复后刷新所在页面

顶部

底部
Feed on
Posts
Comments

1. 下载OpenWrt官方网站上的固件在这里下载
openwrt-ar71xx-generic-gl-inet-6416A-v1-squashfs-sysupgrade
2. 拔掉路由器上的一切连线。

3. 电脑连接路由器LAN口,并设置电脑的IP地址为 192.168.1.2

4. 按住路由器的 reset 键,插入电源开机,此后会看到绿灯闪烁,待红灯亮起时松开reset键,此时路由器进入uboot web界面

5. 电脑上使用浏览器打开地址 http://192.168.1.1,将会看到:

1

6.选择刚才下载的文件后,点击 Upload按钮,开始刷机。

7. 刷机的过程中路由器的指示灯会频繁闪烁,待闪烁停止后,刷机完成,路由器会自动重启,重启的过程中,电脑上可以看到网络连接回暂时断开,然后会自动恢复。

8. 带网络连接恢复后,将网络连接重新设置为自动获得IP地址。

9. 电脑网络连接自动获得192.168.1.0/24的地址成功后,telnet 到192.168.1.1,如果连接成功,并看到OpenWrt提示符,则刷机成功
10.telnet后输入passwd 修改密码 然后就可以用putty连接路由器了

11.putty连接后依次输入以下命令,系统会自动安装所需的软件包。

opkg update
opkg install luci 

12.在电脑端的浏览器中输入“192.168.1.1”,可访问路由器就表示安装成功
2
13.默认界面是英文的这个时候输入root用户名密码就是你刚刚用“passwd”命令修改的密码
3
14.按照上图标注点击进入后修改

dest root /
dest ram /tmp
lists_dir ext /var/opkg-lists
option overlay_root /overlay
src/gz chaos_calmer_base http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/base
src/gz chaos_calmer_luci http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/luci
src/gz chaos_calmer_management http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/management
src/gz chaos_calmer_packages http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/packages
src/gz chaos_calmer_routing http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/routing
src/gz chaos_calmer_telephony http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/telephony 

dest root /
dest ram /tmp
lists_dir ext /var/opkg-lists
option overlay_root /overlay
src/gz chaos_calmer_base http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/base
src/gz chaos_calmer_luci http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/luci
src/gz chaos_calmer_management http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/management
src/gz chaos_calmer_packages http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/packages
src/gz chaos_calmer_routing http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/routing
src/gz chaos_calmer_telephony http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/telephony
src/gz barrier_breaker_base http://www.gl-inet.com/openwrt/2.0/packages/base
src/gz barrier_breaker_luci http://www.gl-inet.com/openwrt/2.0/packages/luci
src/gz barrier_breaker_management http://www.gl-inet.com/openwrt/2.0/packages/management
src/gz barrier_breaker_oldpackages http://www.gl-inet.com/openwrt/2.0/packages/oldpackages
src/gz barrier_breaker_packages http://www.gl-inet.com/openwrt/2.0/packages/packages
src/gz barrier_breaker_routing http://www.gl-inet.com/openwrt/2.0/packages/routing
src/gz barrier_breaker_telephony http://www.gl-inet.com/openwrt/2.0/packages/telephony 

之后再用putty连接路由器输入以下命令:

opkg update
opkg install luci-i18n-chinese 

然后进入后台选择中文刷新即可
4

1 个评论 to “【Openwrt】Gl-inet刷机Openwrt纯净版教程”

  1. PLsheep说道:

    我是新手,想问问
    我的是inet AR150可以用这固件吗?
    这固件兼容大部分inet路由器?

有什么想法,说两句吧